Fullstrip Gold Non-Ammoniated Stripper
Fullstrip® Gold is a fast-acting non-ammoniated stripper that will remove all types of finishes and most sealers; acrylics, co-polymers types, metal cross-linked or conventional. Specifically formulated for removal of even the worst build-up, this concentrated combination of powerful ingredients assures complete emulsification and removal of aged finish and sealer. Removable problems caused by repeated high speed burnishing will be solved using Fullstrip® Gold. Low foam and low odor formula.
9551 – 4/1 Gallon
9555 – 1/4 Pail
95555 – 1/55 Drum
Before stripping always dust mop the floor and remove gum, labels and other attached soil deposits with a long handled scraper or putty knife.
pH – 12.8-13.9
Appearance – Clear, Light Orange Liquid
Fragrance – Light Solvent
Freezing Point – About 32°F
Solubility in Water – Complete
Flashing Point – None
Directions for Use
Directions for Use:
1. Dilute at 16 oz. per gallon (1:8 ratio) or up to 32 oz. per gallon (1:4 ratio) of cool water.
2. Apply the diluted solution of Fullstrip® Gold using a clean mop. Let solution work for 5 minutes and do not let dry.
3. Scrub using a black pad under a swing machine.
4. Remove the remaining solution from the floor using a mop or wet vacuum. Rinse and inspect the floor for shiny spots. Repeat 2 and 3 if any finish remains on the floor.
Water – 7732-18-5
2-Butoxyethanol – 111-76-2
Monoethanolamine – 141-43-5
Sodium metasilicate – 6834-92-0
Potassium hydroxide – 1310-58-3
Ethylene glycol phenyl ether – 122-99-6