3-Way is a unique, specially formulated acidic, non-abrasive liquid that safely dissolves away hardened film, scale, and rust caused by lime, magnesium, iron, and other materials in the water supply. It is able to effectively remove built-up deposits that are unaffected by conventional cleaners due to its 9% hydrochloric acid formulation. This unique formulation does not simply mask odors – it eliminates them, leaving a pleasant peppermint fragrance. 3-way also contains corrosion inhibitors which substantially reduce or eliminate damage to chrome, pipes and traps.
9570 – 12/32 oz
Use on sinks, tubs, wall tile, showers, toilets, chrome, fiberglass, and stainless steel.
pH – 0.5 ± 0.5
Color – Clear Green
Fragrance – Peppermint
Freezing Point – About 32°F
Solubility in Water – Complete
Flash Point – None
Water – 7732-18-5
Hydrochloric Acid – 7647-01-0
Ethoxylated Alkyl Amine – 61791-26-2
Undeceth-7 – 34398-01-1
Fragrance – N/A
Directions for Use
Wear rubber gloves when handling this product.
1. APPLY 3-WAY to the inside rim of bowl.
2. SWAB or SCRUB thoroughly inside and outside surfaces of bowl, also top and bottom of seat.
3. RINSE applicator in clear water and rinse entire fixture.
1. APPLY 3-Way behind and under the inside lips where water outlets are located.
2. SWAB or SCRUB inside of drain pipe. Flush.
3. RINSE entire fixture with cold water.
TUBS AND SHOWERS:
1. APPLY diluted 3-Way to surface. Dilute 1 part 3-Way to 3 parts water.
2. SWAB or SCRUB surface.
3. Rinse with cold water.