Superscope II Non-Ammoniated Stripper

Superscope™ II is a fast-acting non-ammoniated stripper that will remove all types of finishes and most sealers; acrylics, co-polymers types, metal cross-linked or conventional. Specifically formulated=for removal of even the worst build-up, this concentrated combination of powerful ingredients assures complete emulsification and removal of aged finish and sealer. Removable problems caused by repeated high speed burnishing will be solved using Superscope™ II. Low odor and low foaming formula.

F209026 – 1/5 pail

Use Information

Use for the removal of any floor finish or sealer that has been applied over resilient tile such as vinyl, vinyl composition, rubber, etc. This product is also recommended for use on hard surfaces such as terrazzo, quarry tile and brick. DO NOT USE on linoleum, asphalt tile, or tile in poor condition.

Product Specifications

pH – 12.8 ± 13.9

Appearance – Clear, Light Orange Liquid

Fragrance – Light Solvent

Freezing Point – About 32°F

Solubility in Water – Complete

Flash Point – None

Directions for Use

1. Dilute at 16 oz. per gallon (1:8 ratio) or up to 32 oz. per gallon (1:4 ratio) of cool water.

2. Apply the diluted solution of Superscope™ II using a clean mop. Let solution work for 5 minutes and do not let dry.

3. Scrub using a black pad under a swing machine.

4. Remove the remaining solution from the floor using a mop or wet vacuum. RINSE and INSPECT the floor for shiny spots. Repeat 2 and 3 if any finish remains on the floor.

SPECIAL PRECAUTIONS: Not for use on wood or painted surfaces. Before use on asphalt tile, linoleum or rubber test a small hidden area for any color change.

FOR INDUSTRIAL USE ONLY

IMPORTANT: Use only as directed. Do not mix with anything unless recommended since harmful conditions and poor performance could result. Do not pour unused product back into original container. All floors are slippery when wet. To prevent falls, exercise care when working and block off traffic with ‘Caution’ signs until floor is completely dry.

Ingredients

Water – 7732-18-5

2-Butoxyethanol – 111-76-2

Monoethanolamine – 141-43-5

Sodium metasilicate – 6834-92-0

Potassium hydroxide – 1310-58-3

Ethylene glycol phenyl ether – 122-99-6

Related Products

View All Floor Care Products