Accolade Sealer/Finish

Accolade™ is a versatile sealer/finish which has been formulated to protect a wide variety of non-resilient and resilient flooring materials. By blending acrylic polymer elements fortified with urethane, Franklin has combined the properties of a top quality sealer with those of a superior floor finish.

F139022 – 4/1 gal.
F139026 – 1/5 pail
F139038 – 1/55 drum

Use Information

Can be used on terrazzo, quarry tile, brick, unglazed ceramic, Mexican tile, slate, unpolished marble and all types of resilient flooring.

Product Specification

pH –  8.6 ± 0.2

Appearance – Opaque White Emulsion

Fragrance – Polymeric

Freezing Point – About 32°F

% Total Solids – 25.4

% Non-Volatile Solids – 19.5 ± 0.5

Boiling Point – 212°F

Solubility in Water – Dispersible

Flash Point – None

Coverage – 1700 – 2000 sq. ft per gallon (may vary due to differences in porosity of the surface.)

Directions for Use

Initial Application: 

1. Remove old sealer/finish following label directions using an appropriate Franklin stripper.

2. Apply a thin coat of AccoladeTM using a clean finish mop.

3. Allow 30-60 minutes drying time.

4. Apply 3-4 additional coats. For best results, allow adequate drying time between coats.


1. Dust mop the floor. Remove gum, labels and other attached soils with a
long-handled scraper or putty knife.

2. Damp mop or autoscrub using a Franklin cleaner, following the label directions.

Directions for Use


Water – 7732-18-5

Styrene acrylic polymer – 25085-34-1

Diethylene glycol monoethyl ether – 111-90-0

Polypropylene emulsion – Mixture

Tri butoxyethyl phosphate – 78-51-3

Related Products

View All Floor Care Products